Rack Mounted Load Banks

In order to meet the requirements of the next generation of high-density, intelligent and low pue in the data center, the corresponding load of the micro module is also evolving iteratively.

Aanvraag sturen

PRODUCT OVERVIEW

In order to meet the requirements of the next generation of high-density, intelligent and low pue in the data center, the corresponding load of the micro module is also evolving iteratively. The rack mounted resistive load bank is an important test tool, which realizes the simulation and replacement of L2 layer equipment (conventional server, high-density server and high-density router) in the computer room through the adjustment of heat source and air volume.

PRODUCT PICTURE AND APPLICATION

PARTIAL PARAMETERS

Note: all parameters are for reference only and can be customized
Product name	rack load bank
Rated voltage	AC250V
Maximum load power	According to customer needs
Load grading	According to customer needs
Load accuracy (per gear)	±2 percent
Connection mode	Three input,independent control power input
Control power	AC220V/50Hz
Insulation class	F
Air volume	The maximum air volume is 1200 ㎡/h, which supports manual mode / automatic mode and can be adjusted
Cooling mode	Forced air cooling,forward air,rear air
Control mode	Load switching of manual miniature circuit breaker
Protection function	High temperature alarm(70 degree ) high temperature automatic unloading(85 degree )
Color	Customized
Ambient temperature	-20 degree to 50 degree
Humidity	Up to 100 percent
Altitude	Up to 2500m
Atmospheric pressure	86 to 106kPa

MORE SPECIFICATIONS

Power(kW)	Voltage(V)	Frequency(Hz)	Height	Loading step
3	220/240	50/60	3U	0.5kW
3.5	220/240	50/60	3U
4	220/240	50/60	4U
4.5	220/240	50/60	4U
5	220/240	50/60	4U
6	220/240	50/60	6U
7	220/240	50/60	6U
8	220/240	50/60	8U
9	220/240	50/60	8U
10	220/240	50/60	8U
12	220/240	50/60	12U

PROTECTION FUNCTION

1. Fire protection: the resistance module is separated by copper studs, and the mica plate is separated from the bottom plate to achieve the effect of fire prevention.

2. Temperature protection: alarm when the temperature reaches 55 degree and disconnect the load. After disconnecting the load, the alarm needs to be removed before restarting the equipment.

3. Overload protection: alarm when the load exceeds 3500W and disconnect the load. After disconnecting the load, it is necessary to clear the alarm before restarting the equipment.

4. Fan: the fan can realize the air volume of 0-1200, and there is a 3-minute fan to delay the heat dissipation after the operation.

Populaire tags: rack mounted load banks, China, suppliers, manufacturers, factory, customized, price, quotation

Een paar: 3,5 kW rackgemonteerde loadbank met dubbele voeding

Volgende: Op server rack gemonteerde belastingbanken voor datacenter